1. During the use of aluminum alloy doors and windows, the movement should be light, and the push and pull should be natural; if you find it difficult, do not pull or push hard, but troubleshoot first. Dust accumulation and deformation are the main reasons for the difficulty in drawing aluminum alloy doors and windows. Keep the door frame clean, especially the sliding slots. Dust that accumulates in the grooves and on top of the door seals can be vacuumed up.
2. In case of rain, after the rain stops, the rainwater on the aluminum alloy doors and windows should be wiped in time to prevent the rainwater from corroding the doors and windows.
3. The aluminum window can be wiped with a soft cloth dampened with water or neutral detergent. Ordinary soap and washing powder, detergent powder, detergent and other strong acid-base cleaners are not allowed.
4. Sealing cotton and glass glue are the key to ensure the sealing, heat insulation and waterproof of aluminum alloy windows. If it falls off, it should be repaired and replaced in time.
5. Frequently check the fastening bolts, positioning shafts, wind braces, floor springs, etc., and replace the damaged and vulnerable parts of the aluminum alloy window in time. Add lubricating oil regularly to keep it clean and flexible.
6. Always check the connection between the aluminum alloy window frame and the wall. If it loosens over time, it can easily deform the frame as a whole, making it impossible to close and seal the window. Therefore, the screws at the connection should be tightened immediately. If the screw foot is loose, it should be sealed with epoxy superglue and a small amount of cement.
Post time: Jul-24-2023